VISSIM 5.30-05 User Manual

7 Simulation of Pedestrians
Parameter Definition Column Header
destination is on a different level,
the value returns the distance to
the stair intended to be used.
Simulation time Simulation time [s] (not in the
Pedestrian Info window, but in the
status bar of the VISSIM window)
Simulation time of
day
Simulation time as time of day
[hh:mm:ss] (not in the Pedestrian
Info window)
Speed [km/h] Speed [km/h] at end of time step v
412 VISSIM 5.30-05 © PTV AG 2011
t
TimeOfDay
Speed [m/s] Speed [m/s] at end of time step v_mps
Start time Start time [simulation second] StartT
Start time of day Start time as time of day
[hh:mm:ss] (not in the Pedestrian
Info window)
StartTimeOfDay
Static route Static route number StatRoute
Static routing
decision
Static routing decision number StatRoutDec
Time delays Accumulated time delays [s ] TotalDelay
Time gains Accumulated time gains [s ] TotalGain
Total distance
[km]
Total distance traveled in network
[long length]
Total distance [m] Total distance traveled in network
[short length]
TotalDist_km
TotalDist_m
Total time Total time in network [s] TotalTime
Width Pedestrian width [m] Width
World coordinate
x
World coordinate
y
World coordinate
z
World coordinate x (Pedestrian
position)
World coordinate y (Pedestrian
position)
World coordinate z (Pedestrian
position)
Example: Pedestrian Record file *.PP
The following extract represents the Pedestrian Record:
Pedestrian Record
Worldx
Worldy
Worldz