VISSIM 5.30-05 User Manual

14 Glossary of Files associated with VISSIM
14.1 Simulation Output Files
Extension Name Content
*.A00
:
*.A99
Used by
various
evaluations
Output files for various specifically defined
evaluations.
*.ANI Animation Contains recorded simulation for playback.
*.BEO Observation Binary file that includes vehicles position,
speed and acceleration for each vehicle for
each simulation second.
*.EMI Emission
output
*.ERR Run time
warnings
Contains total emissions in grams for CO
and NOx. This is not the output of the
optional warm/cold emissions module.
Contains warnings of non-fatal problems that
occurred during the simulation.
*.FHZ Vehicle Inputs List of all vehicles including time, location
and speed at their point of entry into the
VISSIM network.
*.FZP Vehicle
Record
Output
*.KNA Node
Evaluation
Output
*.KNR Node
Evaluation
Raw data
*.LDP Signal/detector
record
*.LOG Simulation
Log file
*.LSA Signal
changes
*.LZV Signal timing
log
*.MDB Database
output
Contains vehicle information specified for
collection by the user in the FZK file in the
Vehicle Record Configuration window.
Contains the compiled data output from the
node evaluation
Contains the raw data output from the node
evaluation
Contains log of signal display changes and
detector actuations (to be configured using a
*.KFG file).
File is created automatically and contains
real time information about the current
simulation run.
Example: The number of paths found when
using Dynamic Assignment.
Contains all signal changes occurring during
a simulation run in chronological order.
Contains green and red times for all signal
groups (phases) of all controllers.
Analyzer Reports and other output data
662 VISSIM 5.30-05 © PTV AG 2011