VISSIM 5.30-05 User Manual

7 Simulation of Pedestrians
Select Selection of one or several elements in the network display
► Activate the appropriate construction element type. (The current shape
mode is not regarded.)
► Single-Select:
- Left-click the construction element in the network display. The
selected element is highlighted on screen.
- Double-click the construction element to call the properties window.
► Multi-Select:
- Left-click and keep left mouse-key pressed while drawing a polygon
around the elements you would like to select for further editing.
Multi-selection regards all construction elements which are fully
covered by the multi-selection polygon.
- Double-click in the polygon to call the properties window.
Single-select: If multiple construction elements of the selected type overlap
at the click position, the button (default shortcut TAB) may be used to
browse through all elements of this type being located at the mouse click
position in order to select the desired area or ramp or obstacle.
Except EDIT SHAPE, any editing functionality can be applied to both, a single
element or multiple selected elements.
Selection of one or several elements in the list
► Activate the appropriate construction element type.
► Right-click to call the list of all elements of this type. The list contains all
construction elements of the particular element type.
The numbering must not be continuously ascending, since numbering
of construction elements of different types does not count separately.
- Left-click to select a single element. The selected element is
highlighted on screen.
- Left-click as many elements as necessary while pressing CTRL
simultaneously to select multiple elements one by one.
- Left-click the first entry you would like to select and left-click the last
entry of a continuous block of entries while pressing SHIFT
simultaneously.
► Right-click to call the context menu.
Since the property window remains open during graphical editing, selection
via the particular properties window provides quick access to data editing
and shape or position editing simultaneously.
Prior to DELETE, the properties window needs to be closed after selection.
356 VISSIM 5.30-05 © PTV AG 2011