VISSIM 5.30-05 User Manual

10 Output of Results
[CONNECTION] The connection properties
depend on the provider.
Only selected properties are
listed below:
● Access
provider)
2003 (Jet
- Database name:
Name of the database
file (MDB) for the
-
VISSIM output.
User name: Unless a
specific user name is
needed use the
default value.
● Access 2007 (Access
Database Engine OLE DB
Provider)
- Data source: Name of
the database source
file (*.ACCDB).
- Storage location:
Name of the storage
location.
[ADVANCED]
& [ALL]
● Oracle:
- Server Name: Provides the connection to the Oracle server.
- User name: An existing user name must be entered.
- Password. Note: The password provided here will be saved in the
VISSIM network file as plain text (not encrypted).
- Allow Saving Password needs to be active.
Further properties depend on the selected provider. Typically these
properties can be left at their default values.
10.1.3.3 Database Output Data
The database output (what information is to be stored as *.MDB) is
configured directly in the configuration window of each evaluation type. By
default, all evaluations are stored in an ASCII text file, not in a database.
For data configuration and activation of the database output please refer to
the following sections:
► Vehicle records: cf. section 11.7
► Link evaluations: cf. section 11.11
► Paths (Dynamic Assignment only): cf. section 11.21
484 VISSIM 5.30-05 © PTV AG 2011