VISSIM 5.30-05 User Manual

3 Program Handling
PEDESTRIAN
MODE
ELEMENTS
In the pedestrian traffic mode a new construction element of the
corresponding type can be created or an existing item can be edited while
one of the upper three buttons is pressed. The buttons underneath serve for
definition of pedestrian inputs or routes and evaluations as well. For details
please refer to chapter 7 if not stated otherwise.
Pedestrian areas
Pedestrian obstacles
Pedestrian ramps
Inputs of pedestrian flows
Routes of pedestrians
Measurement areas of pedestrians
Travel times of pedestrians
3.1.2.2 Customizing Toolbars
Buttons of toolbars can be re-arranged, inserted or removed. New toolbars
can be created. Also menu commands are available to be placed inside any
of the toolbars.
If you customize VISSIM toolbars it might be difficult for you to locate
buttons that are referenced in the manual or by the hotline.
Editing the toolbar content
1. Right click inside the toolbar area. The context
menu appears.
2. Choose CUSTOMIZE... to open the Customize window
3. In the [TOOLBARS] tab you may
- Enable/Disable a toolbar:
Toggle the checkbox in the list of Toolbars
- Create a new toolbar:
Press NEW... and choose the desired name and
position of the new toolbar. Then confirm with
OK
- Rename/Delete a custom toolbar:
Press the corresponding buttons (the standard
VISSIM toolbars cannot be removed or deleted)
- Reset to VISSIM defaults: Press RESET... and
confirm with Ok
44 VISSIM 5.30-05 © PTV AG 2011