VISSIM 5.30-05 User Manual

12 Dynamic Assignment
You may convert the current node definition (polygon or segments) into the
respective other node definition, cf. section 12.3.2.5.
Any conversion is always followed by automatic adjustment of the new
node definition which can be edited by the user subsequently.
12.3.2.2 Properties & Options
● No.: Node number
● Name: Optional name or comment
● Label: When showing labels of all nodes (see VIEW - NETWORK
ELEMENTS...) this option allows to individually switch off the label of that
one.
● Node evaluation: If option Node is checked via EVALUATION – FILES,
then the node is regarded for evaluation if this option is active.
● Dyn. Assignment: If this option is active, the node is regarded for the
network graph during Dynamic Assignment.
If this option is not active, the node is ignored for the network graph
during Dynamic Assignment. Nevertheless it can be used for node
evaluation, as long as the particular option has been set.
In the Edge selection window only those nodes are displayed for which
option Dyn.Assignment has been checked, cf. section 12.3.3.
● User-defined orientations: Check this option to overwrite the
orientation that is automatically determined from the intersection coordinates
of the node polygon and the edge leading to the neighboring
node if this VISSIM orientation does not match reality.
In the Orientations table, the Neighbor column contains the list of the
selected node’s neighboring nodes in the network. Select one of the
table rows and select the appropriate orientation from the drop-down list
602 VISSIM 5.30-05 © PTV AG 2011