VISSIM 5.30-05 User Manual

3 Program Handling
editing (Pedestrians add-on): Undoes the
previous action.
Redo Redo functionality for construction element
editing (Pedestrians add-on): Redoes the
previously undone action.
Delete Delete selected Links/Connectors and/or
Nodes
Split Link Splits the selected link F8
Combine Routes Combines static routes
3D Signal Heads Enables the 3D Signal Heads editing mode
and displays 3D signal head locations in 2D
Selection Mode Allows for selection of the Standard (Single-
Select), Multiselect or Label mode for
network editing
Selection List Calls the list of network elements for the
currently active network editing mode
Check
Nodes/Edges
Only in the Nodes mode: Checks the
nodes/edges structure for damages
Edge Selection Active only in Nodes mode: Opens the list of
all edges of a Dynamic Assignment
Auto Routing
Selection
Active only in Routes mode or Parking Lots
mode: Opens the list of all paths of a
Dynamic Assignment
Rotate Network Rotates the entire network around (0,0)
Translate
Network
Moves the entire network in x, y and/or
z direction
VIEW Commands and options for display on screen:
Options Set general display options
36 VISSIM 5.30-05 © PTV AG 2011
DEL
CTRL+H
Level Display Define 3D display for pedestrians add-on
Center Line Toggle center line display CTRL+A
3D Mode Toggle 2D/3D display mode CTRL+D
Network
Elements
Show Network
Elements
Configuration of the multiple network
elements display
Switch on/off display of network elements CTRL+N
Background Load and configure background image
file(s)