VISSIM 5.30-05 User Manual

11 Evaluation Types for Simulations of Vehicles
● Including parked vehicles (Dynamic Assignment only): Includes
vehicles that are contained in a parking lot in the evaluation output as
well.
● Database: When active, evaluation output is directed to a database to
the specified Table Name (rather than to an ASCII text file). The table
name must not be used for any other VISSIM database evaluations. In
order to use the database output the database connection needs to be
configured (see section 10.1.3).
Filter
Once the vehicle record parameters are selected, a filter may be applied to
capture specific vehicles within the simulation. This can be accessed by
pressing the FILTER button in EVALUATION – FILES… once the option Vehicle
Record is active.
In addition to the selection of vehicle classes, also a time interval for the
evaluation as well as the resolution of recording are to be defined. If an
integer > 1 is entered for Resolution, only one time step will be logged for the
user-defined number of time steps.
If the evaluation should only be done for individual vehicles, their numbers
are to be added or removed via the buttons, if option Individual Vehicle is
active.
By default, all vehicle classes are recorded within the simulation period.
The filter information is stored in a filter configuration file (*.FIL).
516 VISSIM 5.30-05 © PTV AG 2011