VISSIM 5.30-05 User Manual

7 Simulation of Pedestrians
v : Speed [km/h]
DevSpeed : Deviation of pedestrian speeds [km/h]
t : End of aggregation time interval [simulation second]
TotalDelay : Total time delay [s] on measurement area(s) (of pedestrians who left
measurement area(s) during aggr. interval)
TotalDist : Total distance [m] traveled on measurement area(s) (of pedestrians who left
measurement area(s) during aggr. interval)
TotalDwell : Total time [s] spent on measurement area(s) (of pedestrians who left
measurement area(s) during aggr. interval)
TotalGain : Total time gain [s] on measurement area(s) (of pedestrians who left
measurement area(s) during aggr. interval)
WorldZ : World coordinate z
AvgXOri; AvgYOri; Density; vDes; EvalNo; NumPeds; SourceVol; v; DevSpeed; t; TotalDelay;
TotalDist; TotalDwell; TotalGain; WorldZ;
; ; Mean; Mean; ; Mean; ;Mean; ; ;
Mean; Mean; Mean; Mean; Mean;
0.0502; 0.1603; 0.01; 4.90; 1; 0.0; 4; 1.78; 3.35; 300;
1.43; 1.11; 2.18; 0.00; 5.12;
0.0667; -0.1242; 0.00; 4.93; 2; 0.0; 2; 2.79; 2.38; 300;
0.75; 1.32; 1.60; 0.00; 2.56;
0.0995; 0.1686; 0.01; 4.71; 3; 0.0; 3; 2.65; 2.25; 300;
0.67; 1.13; 1.53; 0.00; 0.00;
Example: Raw data file *.MERP
In the data block underneath the file header, the set of column headers is
listed.
Area evaluation (raw data)
File: D:\Programmes\PTV_Vision\VISSIM-520\Examples\Training\Pedestrians\Hotel.inp
Comment:
Date: Friday, July 10, 2009 2:58:58 PM
VISSIM: 5.20-00* [19452]
Area evaluation 1 : Measurement area(s) 1
Area evaluation 2 : Measurement area(s) 2
EvalNo : Area evaluation number
tEnter : Time pedestrian entered measurement area(s) [simulation second]
tLeave : Time pedestrian left measurement area(s) [simulation second]
PedNo : Pedestrian number
PedType : Pedestrian type
Dwelltime : Total time [s] pedestrian spent on measurement area(s)
vDes : Desired speed [km/h]
v : Speed [km/h]
DevSpeed : Deviation of pedestrian speed [km/h]
Density : Density of pedestrians on measurement area(s) [ped/m²]
AvgXOri : Average of x values of orientation vector
AvgYOri : Average of y values of orientation vector
WorldZ : World coordinate z
TimeDelay : Time delay [s]
TimeGain : Time gain [s]
Dist : Distance [m] pedestrian traveled on measurement area(s)
DistNetwork : Distance [m] pedestrian traveled in network so far
406 VISSIM 5.30-05 © PTV AG 2011