OneSight Administrator Guide

Configuring Gomez GPN Profile Monitors
Get Gomez GPN Monitor – After you provide the account
information (User ID, Password), click Get Gomez GPN Monitor
to retrieve the active monitors configured in your Gomez GPN
service account. If you have previously specified this account
information, these monitors will be retrieved automatically.
Info – Displays information about the selected monitor.
3. Each monitor that you add must have a unique name. You can
let OneSight create a unique name using the Gomez GPN
specifications you supply, or you can type in your own name
for the monitor.
4. On the General tab in the User ID box, type the name of your
Gomez GPN User ID.
5. On the General tab in the Password box, type your Gomez GPN
password.
6. Click Get Gomez GPN Monitor. Using the login information you
have specified, the active monitors configured in your Gomez
GPN service account are identified and listed in the Select
Gomez GPN Monitor dialog box.
7. Select the monitor you want to use and click OK.
8. To verify that the monitor will work as configured, click the
Test button. The Monitor Test window provides information
about the success or failure of the test and indicates what may
be causing any problem.
9. If the test succeeds, click OK in the Add Monitor dialog box to
save these basic Gomez GPN profile monitor settings. You can
now add this monitor to a monitor group. Refer to Adding
Monitors to a Monitor Group in Chapter 4.
194 OneSight Administrator Guide