OneSight Administrator Guide

Global Metric Manager
Unit Measure – Select which unit of measurement should be
associated with this metric and displayed in places like the OneSight
Alerts page and Reports. You can also use this field to enter your own
unit of measurement setting. If you are modifying a metric that is
provided as part of a profile, try to use the existing Unit Measure
setting:
% (percent) – the metric’s data is expressed as a percentage.
bytes – the metric’s data is expressed in bytes.
hours – the metric’s data is expressed in hours.
minutes – the metric’s data is expressed in minutes.
seconds – the metric’s data is expressed in seconds.
– the metric’s data is expressed with no unit of
measurement.
Sample Every – Specifies how often samples are taken
for this metric. Select the unit of time to use for the sampling
interval: seconds, minutes, or hours. You can specify sample
intervals to occur regularly, hourly, or daily.
To Sample Interval Value Example
Regularly integer 5 minutes
Hourly @ 60@15 minutes
Daily @ @23:15 minutes
Daily GMT 24@hh 24@01 hours
To sample at regular intervals, specify a simple integer value and
select the appropriate units. For example, to sample every 5
minutes, enter 5 and select minutes. OneSight selects a random time
516 OneSight Administrator Guide