OneSight Administrator Guide

Configuring LDAP Monitors
2. The Monitor Types box lists all of the types of monitors that
can be applied to your monitor group. Click LDAP to add a
monitor that confirms that a host is responding. Use settings on
the General tab to configure each LDAP monitor.
Host – Specify the host name or IP address of the LDAP Server.
Port – Enter a port number if different from the default.
Anonymous bind – When selected, the connection to the LDAP
Server will be Anonymous Bind, otherwise, the connection will
use simple LDAP authentication.
Note: SSL and SASL authentication schemes are not available.
User DN – Enter the distinguished name.
Password – Enter the password.
254 OneSight Administrator Guide