OneSight Administrator Guide

Configuring OneSight Voice Quality - Basic Profile Monitors
To create a OneSight Voice Quality - Basic Profile monitor:
1. On the Monitors Page, click Add to open the Add Monitor
dialog box.
2. The Monitor Types box lists all of the types of monitors that
can be applied to your monitor group. Click OneSight Voice
Quality - Basic.
Use the options on this tab to configure the monitor. The dial
numbers listed in the drop downs are those that were configured
using the VQ Probe configuration page. The VQ Probe
configuration page can be accessed by clicking the Edit Config
buttons.
Originate Probe – Select the VQ Probe that will place the call.
Edit Config – Displays the VQ Probe configuration dialog box
for editing the selected probe.
Chapter 5: Configuring Monitors 373