OneSight Administrator Guide

Setting Up an Alert to Trigger an Action Plan
Equal Threshold – The response triggered by this setting can be
an action plan (selected in the Respond By list), a health reset
(selected in the Apply To list), or both. The following graphics
show notify once followed by notify repeatedly.
If an action plan is selected in the Respond By list, it is first
triggered if the metric or monitor measurement is equal to the
Threshold value. Use the Trigger Response if Samples Out of
Samples Crossed Threshold settings to avoid triggering
responses during ―acceptable spikes.‖
If Warning State or Error State is selected in the Apply To list, the
monitor’s health will change to warning (yellow) or critical (red)
the first time the measurement is equal to the Threshold value.
This value is based on settings for both Threshold and Trigger
Response if Samples Out of Samples Crossed Threshold).
Chapter 5: Configuring Monitors 429