OneSight Administrator Guide

Configuring URL Monitors
Save object download details – When selected, collects data for
the object timer report.
Save Diagnostic Data – Saves the selected data in the
urldetails.jsp file. This data can also be viewed by clicking the
View URL Details Smartlink on the status details page.
Save HTML from failing runs – Select this option to save
HTML from failing runs.
Save HTML from successful runs – Select this option to save
HTML from successful runs.
Test – When you add or modify a monitor, you can test General
settings to determine if they are set appropriately. After clicking
the Test button, you will see messages in the status window as
the test runs and when the test completes.
3. Each monitor that you add must have a unique name. You can
let OneSight create a unique name using the URL specifications
you supply, or you can type in your own name for the monitor.
4. On the General tab, enter the URL address for the web page you
want to check.
5. If you want to check the content on the page, you can configure
a Good Content String, a Bad Content String, or both. These
settings are optional.
In the Good Content String box, enter a string that should be
present on this web page.
In the Bad Content String box, enter a string that should not
be present on this web page
Note: These strings can be any HTML string; they do not have to
be strings that are visible when viewed with a browser.
350 OneSight Administrator Guide