OneSight Administrator Guide

Adding System Components
Show Systems Where contains – Select the
type of filter and enter any specific text, if necessary. For
example, you could search for all systems at the location
Boston. In addition to plain text, you can enter a PERL
expression in the contains field.
– Displays the list of systems based on the filter
selections.
Note: Only the systems explicitly owned by your user group are
listed. To change systems in a sub group of your user group you
must log on as a user in the sub group.
Check All – Checks all systems in the system list.
Uncheck All – Unchecks all systems in the system list.
Save Changes – Saves changes and redisplays the dialog box.
4. Filter the list of displayed systems, if necessary.
5. Select the location that you want to apply to the selected
systems. Grayed out systems are already assigned to the
selected location.
6. Select or deselect systems using the check box in front of the
system name or using the Check All and Uncheck All buttons.
7. Click Save Changes to apply the location to the selected
systems.
8. Repeat these steps as necessary.
9. Click Close when you are done.
626 OneSight Administrator Guide