OneSight Administrator Guide

Adding Actions to the Plan
To create a new action for this plan, click Add in the Global
Action Manager, then create a new action.
You can add or modify actions at any time; additions made to
the list of actions affect all action plans, except those plans
currently displayed as in use on the OneSight Console. The
following parameters must be configured for each action:
Name – Displays the common name for this action. This name
is used to identify this action throughout the OneSight system.
Note: Actions cannot be duplicated using the same name. To
create a duplicate action, add a new action to the list using a
different name.
Action Type – Displays the current action type.
Message Template – Displays the list of message templates. By
default, OneSight selects the message template most
appropriate for the specified action type. You can also create
your own custom message templates. See Adding Message
Templates for details.
Note: The %DescriptionByOID% substitution variable can be
used in the SNMP Trap message template to generate an OID
Chapter 8: Creating Action Plans 639