OneSight Administrator Guide

Editing VQ Probes
SIP Configuration
PBX – Enter either the IP Address or the name of the Call
Manager with which the extension registers.
Register with PBX – Enter whether or not it is necessary to
register with the PBX.
Username – Enter the user name that all probes will use to
authenticate to the PBX. This field is displayed when Register
with PBX is set to Yes.
Password – Enter the password that all probes will use to
authenticate to the PBX. This field is displayed when Register
with PBX is set to Yes.
Skinny
Skinny Type – Select the Skinny type.
Station MAC Address – Enter the MAC address of the phone
configured on the Call Manager.
PBX – Enter either the IP Address or the name of the Call
Manager with which the extension registers.
Register with PBX –Enter whether or not it is necessary to
register with the PBX.
Local Terminal Type – Select the local terminal type.
H.323
H.323 Type – Select the type of H323 that you want to use.
PBX – Enter either the IP Address or the name of the Call
Manager with which the extension registers.
878 OneSight Administrator Guide