OneSight Administrator Guide

Enabling/Disabling a Monitor
To test a dedicated monitor:
1. Open the Monitor Group Editor.
2. Click the Monitors tab.
3. In the Monitors list, select the monitor that you want test and
click Modify.
4. In the Monitor Editor, click the General tab.
5. To verify that the monitor will work as configured, click the
Test button. The Monitor Test window provides information
about the success or failure of the test and indicates what may
be causing any problem.
6. If the test fails, make changes to the monitor configuration
based on the information in the Monitor Test window.
Enabling/Disabling a Monitor
To enable or disable a monitor:
1. Open the Monitor Group Editor.
2. Click the Monitors tab.
3. In the Monitors list, the check box that appears next to each
monitor’s name determines whether or not that monitor is
enabled.
To disable a monitor, clear the check box adjacent to that
monitor’s name.
To re-enable a monitor, select the check box adjacent to that
monitor’s name.
Chapter 5: Configuring Monitors 471