OneSight Administrator Guide

Configuring OneSight Voice Quality - Advanced Profile Monitors
7. If the script requires input parameters, the number of
parameters required is shown in the Parameters field. Click
Input Parameter to display the Input Parameter Editor.
This dialog box lets you configure parameters particular to this
script. The columns displayed are based on the script’s
requirements.
Add – Displays the Input Parameter Editor for entering
parameters that pertain to this script.
Modify – Displays the Input Parameter Editor for modifying the
selected parameter set.
Remove – Deletes the selected parameter set.
Add from CSV file – Displays the Upload Input Parameter dialog
box for adding parameters from a Comma Separated Value file.
The file must be set up so that the first line of the file contains
the column names, the second line contains the type of data,
and the third line contains the default values. The input
parameter data should start on the fourth line and each line
should only contain one set of input parameter data. Data
should be surrounded by double quotes.
Parameters – Displays the configured parameters.
8. The Input Parameter Editor shows the input parameters that it
needs. In the example above, the script needs a phone number
and digit. Click Add to add a parameter.
382 OneSight Administrator Guide