OneSight Administrator Guide

Deleting VQ Probes
in addition to restarting the Data Collector. Before restarting the
Data Collector, update the Comm.ConnectFrom field with the IP
address to use to connect to Empirix OneSight and update the
PackageAgentName.
Codec Comparison Chart
The following chart shows some commonly used Codecs and their
maximum expected MOS scores from best to worst.
Codec Data rate (kb/s) MOS
G.711 64 4.5
G.723 6.3 3.9
G.726 24 3.8
G.729a 8 3.7
G.723 5.3 3.65
Deleting VQ Probes
You can remove a VQ Probe from the VQ Probes dialog box. Probes
can only be removed if they are not connected to OneSight and if
they are not being used by any monitors, including disabled
monitors. If the probe is still connected, OneSight will add the
probe back to the list. To delete a VQ Probe:
1. Click the Configure menu.
2. Click VQ Probes.
3. Select the VQ Probe that you want to delete and click Remove.
884 OneSight Administrator Guide