OneSight Administrator Guide

Configuring Global Action Options
5. From the Message Template list, select a message template for
the action. By default, OneSight selects the message template
most appropriate for the specified action type. You can also
create your own custom message templates. See Adding
Message Templates for details.
6. In the Escalation Timeout field, enter the amount of time (in
minutes) for this action to exist before escalating to the next
action in the action plan.
7. Enter a reminder interval. This is the amount of time you want
OneSight to wait before repeating this action.
8. Enter the total counts. This is the number of times to repeat this
action.
9. In the SNMP Configuration section, enter the destination host
and trap source for this action.
10. From the Specific Type list, select the appropriate type for this
action.
11. If the Specific Type is OneSight User, enter a message for the
user in the User Text box.
12. Click Test to confirm that the information you entered will
create a successful action.
Note: The settings in the Global Options for this action type
must be defined before a test of this action will succeed.
13. Click OK.
Triggering an SNMP Set Action
The Simple Network Management Protocol (SNMP) Set action type
lets you perform an SNMP set operation, setting a particular MIB
Object ID (OID) to a specified value. For this action to work,
Chapter 8: Creating Action Plans 675