OneSight Administrator Guide

Troubleshooting Setup
Setup also copies additional MSI files (60 MB) to your system
drive’s TEMP or TMP folders. To reduce the amount of disk space
required on your C:\ drive, do the following:
1. On the OneSight Server, click Start, then point to Settings, then
click Control Panel.
2. Double-click System.
3. Click the Advanced tab and then click the Environment
Variables button.
4. Under User Variables for , highlight TEMP. Click Edit.
5. In the Value box, type a drive other than your system drive,
followed by TEMP, for example, D:\TEMP. Click OK to save
these changes.
6. Do the same for TMP: Under User Variables for ,
highlight TMP, then in the Value box, type a drive other than
your system drive, followed by TMP.
7. Click Set to apply your changes, then click OK to close the
System Properties dialog box.
You can also minimize impact on the C:\ drive by adding space for
a Paging File on additional drives. In Control Panel, open System.
On the Performance tab, click the Change button for Virtual
Memory. If you have additional fixed disk drives, you can allocate
more space for virtual memory paging on these drives and decrease
the space allocated on the system (C:\) drive. The machine must be
restarted to have these changes take effect.
Moving the OneSight Database to a Remote SQL Server
When you first run Setup, you can choose to use a remote SQL
server. However, if you installed MSDE or Microsoft SQL Server on
Chapter 19: Troubleshooting 907