OneSight Administrator Guide

Modifying An Action Plan
3. In the Action Manager - Modify dialog box, change the name
for the action in the Name box, if necessary.
4. In the Escalation Timeout box, enter the amount of time (in
minutes) for this action to exist before escalating to the next
action in the Action Plan.
5. Enter a reminder interval and total count.
6. In the SNMP Set Configuration section, enter the host and port,
as required.
7. Enter or select the new OID, value and data type.
8. Click Test to confirm that the information you entered will
create a successful action.
Note: The settings in the Global Options for this action type
must be defined before a test of this action will succeed. In
addition, the SNMP community string rights in the SNMP
Services Panel must be changed to Read-Write and the service
must be restarted.
9. Click OK.
Modifying a Delay Action
To modify a delay action:
1. On the Action Plans page, click Global Actions.
714 OneSight Administrator Guide