OneSight Administrator Guide

Global Metric Manager
In the case of a web server, this is the port number of the web
server.
Refer to Using Regular Expressions for Pattern Matching in
Chapter 5 for more information on using regular expressions.
in OID column – This setting only applies if Table Get is selected in
the Action box. Enter the column where OneSight will search for
the Table Get string you specified above.
Scale – Type the multiplier you want applied to the data that is
collected.
Setting Scale to 1 means the data will be reported as it is. If the
metric measurement is expressed in kilobytes, setting Scale to 1024
will translate it to bytes. If the metric measurement is expressed in
milliseconds, setting Scale to .001 will translate it to seconds.
MIB Browser – Displays the MIB browser in a separate window. You
can view objects in the MIB browser and copy and paste the
appropriate OID into the Object ID field on the Add Data Source
screen.
Divide by Object ID settings
Use the settings under Divide by Object ID in conjunction with Object
ID settings (above) to gather information that’s best expressed as a
ratio. If you do this, the value retrieved by Object ID (above) is the
dividend and the value retrieved by Divide by Object ID (below) is the
divisor (Object ID/Divide by Object ID).
Enable – Select the Enable check box to divide the value of the
Object ID above by the value of the Object ID you specify below.
Object ID – Enter an object ID. For example, in the HOST-
RESOURCES MIB, disk size (hrStorageSize) and disk in use
(hrStorageUsed) are two different OIDs which, when divided,
give you the ratio, or portion, of the disk that is in use. Using this
544 OneSight Administrator Guide