OneSight Administrator Guide

Displaying the Windows Event Viewer
4. In the Apply to list, select what a crossed threshold or sample
failure should mean in terms of the monitor’s health. For
example, if the threshold is exceeded, decide if that should
cause a Warning State (monitor will turn yellow on the Status
page), Critical State (monitor will turn red), or Nothing.
Note: The Apply to setting is not available if Respond if is set to
Greater Than Threshold (Notify Repeatedly) or Less Than
Threshold (Notify Repeatedly).
Displaying the Windows Event Viewer
To display the Windows Event Viewer:
1. Click the Start button.
2. Point to Programs, then Administrative Tools (Common). In
Windows 2000 and 2003, point to Programs, then
Administrative Tools.
3. Click Event Viewer. The Windows Event Viewer opens.
Chapter 5: Configuring Monitors 451