OneSight Administrator Guide

Adding System Components
5. Enter the properties for discovery. These properties will be used
for each system and saved for each system. Click OK.
6. Click OK when discovery is finished.
Modifying the Location of Multiple Systems
You can change the location of multiple systems at one time. You
can change a maximum of 100 systems, 100 monitors, and 2000
metrics.
To change the location of multiple systems:
1. Click the Configure menu.
2. Select Systems.
3. Select Bulk Location Modification.
This dialog box displays a list of configured systems and their
locations. The list can optionally be filtered. Systems that are
grayed out are in the selected location. This dialog box has the
following options:
Choose a Location To Apply To Multiple Systems – Select the
location that you want to apply to the selected systems.
Chapter 7: Configuring Systems 625