OneSight Administrator Guide

Modifying Monitors
apply to every monitor group monitor that is based on that profile,
use the Profile Editor.
1. Click the Configure menu.
2. Click Monitor Groups to open the Configure Monitor Groups
page.
3. In the Monitor Groups list, click the name of the monitor group
you want to work with and click Modify. The Monitor Group
Editor opens.
4. In the Name column on the Monitors tab, click the monitor that
you want to modify and click Modify to open the Monitor
Editor.
5. In the Monitor Editor, the Metrics list shows all of the metrics
that the monitor can use to monitor your monitor group.
This icon indicates that the metric could not be applied to the
system component it is meant to monitor because you have not
added this type of component to your system definition.
6. To add the missing components to your system definition, click
the System Editor button. The Add Missing Components dialog
box lists the system components that you need to add in order to
apply all the profile’s metrics successfully. For details, see Add
Missing Components.
Enabling/Disabling Monitoring of a System Component
Use the following procedure to modify the behavior of a specific profile
monitor. Your changes will apply only to the particular profile monitor
that you choose to modify. If you want to make global changes to the
characteristics of a profile, changes that will apply to every monitor group
monitor that is based on that profile, use the Profile Editor.
1. Click the Configure menu.
466 OneSight Administrator Guide