OneSight Administrator Guide

Configuring Global Action Options
Reminder Interval – Amount of time (in minutes) to wait before
repeating the action if the alert is still valid.
Repeat for good state – when checked, applies to alerts
associated with a return to good state.
Total Counts – The total number of times to repeat this action.
Test – Performs a test of this action as configured. You must
enable this action type in Global Options before a test of this
action will succeed.
SNMP Set Configuration
Host – The system where the specified SNMP Object ID’s
value will be set. You can use the %SystemName% message
template variable to specify the host.
Port – The port on the specified host.
Community – The community string is the SNMP community
string authorized by the destination trap listener. The default
SNMP community string for OneSight is public.
OID – The OID that you want to set.
Value – The value to set the SNMP Object ID’s value to. You
can also use message template variables to specify the value.
Data Type – The type of data.
Access Control Tab
The Access Control tab lets you specify which user groups can
read, write, or delete this action.
Owner – The user group for this action. An action can be
directly owned by a single user group.
678 OneSight Administrator Guide