Chapter 7 Working with Domino.Doc from a Browser - Lotus ...

24 Domino.Doc User Guide
To access the library on the designated server:
1. Click on the Domino.Doc Neighborhood icon in the navigation pane, or
right-click to get the pull-down menu if this a second, or later, connection.
2. Choose Connect Library.
3. When the Library Connect dialog box appears:
Enter the URL to the Domino.Doc library you want to access.
Enter a library display name. This is the name you want to assign to the
icon that will take you directly to that library in future sessions. It does
not need to be the exact name of the library.
4. Click OK.
5. If you are prompted for your User Name and/or Password, enter that
information, and then Click OK.
If you have multiple libraries, you may want to repeat the connect procedure
for each one at this time.
After you have once successfully connected to the appropriate address, the
previously selected protocol is remembered and used the next time. The
library connection persists, even if you restart your PC, until you disconnect
the library.
In future sessions, you will be able to access a connected Domino.Doc
library in either of two ways:
• By using the desktop shortcut to go directly to a view pane that
displays the icons of previously connected Domino.Doc libraries.
• By using the Windows Explorer navigation pane to find the desired
library icon under the Domino.Doc Neighborhood icon.
Disconnecting the library
To disconnect a library, right-click its library icon and choose Disconnect
Library.
The URL will be retained in the pull-down list in the Library Connect dialog
box so that you can use it later to re-connect that library.
For more information on using this interface, see About Working with the
Windows Explorer Interface.