ITT - Index of

ITT54153, ITT74153 _
DUAL4-UNE-TO-1-LlNE DATA
SELECTORS/MULTIPLEXERS
recommended operating conditions
ITT54153
ITT74153
Min Nom Max Mi" Nom Max Unit
Supply voltage Vee 4.5 5 5.5 4.75 5 5.25 V
Normalized fan-out from each output. N High logic level 20
low logic level 10
Operating free-air temperature range. T A -55 25 125 0 25
20
10 ;
70
°e
ELECTRICAL CHARACTERISTICS over recommended operating free-air temperature range
(unless otherwise noted)
Parameter Min Typ 1 Max Unit Test Conditions Z
VIH High-level input voltage 2 V
Vil low-level ilput voltage 0.8 V
-
V 1 Input elamp Voltage -1.5 V Vee = MIN. Ii = -12mA
-
VOH High-level output voltage 2.4 3.1 V Vee = MIN. VIH = 2V.
Vil = 0.8V.IOH = -800uA
VOL low-level output voltage 0.2 0.4 V Vee = MI':J. VIH = 2V.
Vil = 0.8V.IOL = lSmA
IIH High-level input current (each 40 uA Vee = MAX. VI = 2,4V
input)
1 mA Vee = MAX. VI = 5:5V
IlL Low-level input current (each -1.5 mA Vee = MAX. VI = 0.4V
input)
lOS Short-circuit output current 3 -20 -55 mA Vee = MAX ITT54153
-18 -57 ITT74153
leel Supply current. low-level output 36 52 mA Vee = MAX 1TT54153
36 SO 1TI74153
1 All typical values are at Vee = 5V. TA = 25°e.
Z For conditions shown as MIN or MAX. use the appropriate value specified under recommended operating conditions
for the applicable device type.
3 Not more than one output shoVld be shorted at a time.
3-182