ITT - Index of

ITT5426, ITT7426
QUADRUPLE 2-INPUT HIGH-VOLTAGE
INTERFACE NAND GATES
ElECTR ICAl CHARACTERISTICS over recommended operating free-air temperature range
(unless otherwise noted)
Parameter Min Typ' Max Unit Test Conditions 2
VIH High-level input voltage 2 V
VIL
Low-level input voltage
..
0.8 V
VI I nput Clamp Voltage -1.5 V VCC = MIN Ii = -12mA
VOH High-level output voltage 15 V VCC = MIN. VIL = O.BY.
IOH = 1 mA
10H High-level output current 50 uA VCC = MIN. VIL = O.BY.
VOH = 12V
VOL Low-level output voltage 0.4 V VCC = MIN. VIH = 2V.
IOL = 16mA
IIH High-level input current (each 40 uA VCC = MAX. VI = 2.4V
input)
1 mA VCC = MAX. VI = 5.5V
IlL Low-level input current (each -1.6 mA VCC = MAX. VI = 0.4V
input)
ICCH Supply current. high-level output 4 8 mA VCC = MAX. VI = 0
ICCL Supply current. low-level output 12 22 mA VCC = MAX. VI = 5V
SWITCHING CHARACTERISTICS. Vee = 5V. TA = 25°e
Parameter Min Typ Max Unit Test Conditions
tpLH Propagation delay time. 16 24 ns CL = 15 pF. RL = 1kfl
low-to-high-Ieveloutput
tpHL Propagation delay time. 11 17 ns CL = 15pF.RL = 1kn
high-to-Iow:leveloutput
, All typical values are at V CC = 5V. T A = 25°C.
2 For conditions shown as M IN or MAX. use the appropriate value specified under recommended operating conditions
for the applicable device type.
3-50