ITT - Index of

ITT5450, ITT5451 , IIT74!iO, 1T[7451
EXPANDABLE DUAL 2-WIDE 2-INPUT
AND-OR-INVERT GATES
ELECTRICAL CHARACTERISTICS over recommended operating free-air temperature range
(unless otherwise noted)
Parameter Min Typ 1 Max Unit Test Conditions 2
Vin(l) Logical 1 input voltage required 2 V
at both input terminals of either
AND section to ensure logical 0
at output
Vin(O) Logical 0 input voltage required 0.8 V
at one input terminal of each
AND section to ensure logical 1
at output
V 1 Input elamp Voltage -1.5 V Vee = MIN.li = -12mA
vout!l ) Logical 1 ouiput voltage 2.4 3.3 V Vee = MIN. Vin = 0.8V.
Iload = -400uA
Vout(O) Logical 0 output voltage 0.22 0.4 V Vee = MIN. Vin = 2V.
Isink = 16mA
lin(O) Logical 0 level input current -1.6 mA Vee = MAX. Vin = O.4V
(each input)
lin(1 ) Logical 1 level input current 40 uA Vee = MAX. Vin = 2.4V
(each input)
1 mA Vee = MAX. Vin = 5.5V
lOS Short-circuit output current 3 -20 -55 mA Vee = MAX ITT5450.
ITT5451
-18 -55 ITT7450.
ITT7451
lee(O) Logical 0 level supply current 7.4 14 mA Vee = MAX. Vin = 5V
leC(l ) Logical 1 level supply currerit 4 8 mA Vec = MAX. Vin = 0
1 All typical values are at Vce = 5V. TA = 25°e.
2 For conditions shown as MIN or MAX. use the appropriate value specified under recommended operating conditions
for the applicable device type. Expander inputs X and X are open.
3 Not more than one output should be shorted at a time.
3-82