ITT - Index of

ITT54H05, ITT74H05
HEX INVERTERS (WITH OPEN-COLLECTOR OUTPUT)
ELECTR ICAL CHARACTERISTICS over recommended operating free-air temperature range
(unless otherwise noted)
Parameter Min Typl Max Unit Test Conditions 2
Vin(1 ) Logical 1 input voltage 2 V
required at input terminal to
ensure logical 0 (on) level at
output
Vin(O) Logical 0 input voltage 0.8 V
required at input terminal to
ensure logical 1 (off) level at
output
V1 I nput Clamp Voltage -1.5 V Vee = Min Ii = -'8 rnA
lout(1 ) Output reverse current 250 uA Vee = MIN. Yin = 0.8 V.
Vout(1) = 5.5 V
Vout(O) Logical 0 output voltage (on 0.4 V Vee = MIN. Yin = 2 V.
level)
Isink = 20 mA
lin(O) Logical 0 level input current -2 mA Vee = MAX. Yin = 0.4 V
lin(1 ) Logical 1 level input current 50 uA Vee = MAX. Vin = 2.4 V
1 mA Vec = MAX. Vin = 5.5 V
lec(O) Logical 0 level supply current 40 58 mA Vee = MAX. Vin = 4.5 V
lee(1) Logical 1 level supply current 16 26 mA Vee = MAX. Yin = 0
SWITCHING CHARACTERISTICS. Vee = 5V. TA = 25°C
Parameter Min Typ Max Unit Test Conditions
tpdO Propagation delay time to 7.5 12 ns CL = 25 pF. R L = 280 Q
logical 0 level
tpd1
Propagation delay time to
logical 1 level
10 15 ns' CL = 25 pF. RL = 280 Q
1 All typical values are at Vee = 5 V. TA = 25°e.
2 For conditions shown as M IN or MAX. use the appropriate value specified under recommended operating conditions
for the applicable device type.
3-253