ITT - Index of

CIRCUIT TYPESITT54H73, ITT74H73
DUAL J-K MASTER'-SLAVE FLIP-FLOPS
ELECTRICAL CHARACTERISTICS over recommended operating free-air temperature range
(unless otherwise noted)
Parameter Min Typ' Max Unit Test Conditions 2
Vin(1) Input voltage required to 2 V
ensure logical 1 at any input
terminal
,Vin(O) Input voltage required to O.S V
ensure logical 0 at any input
'terminal
V1 Input elamp Voltage -1.5 V Vee = Min Ii = -S mA
Vout(1) Logical 1 output voltage 2.4 V Vee = MIN.lload =
-500uA
Vout(O) Logical 0 output voltage 0.4 V Vee = MIN.lsink = 20
mA
lin(O) Logical 0 level input current -2 mA Vee = MAX. Vin = 0.4 V
atJ. K. or clock
lin(O) Logical 0 level input current -4 mA Vee = MAX. Vin = 0.4 V
at clear
lin(1 ) Logical 1 level input current 50 ].lA Vee = MAX. Vin = 2.4 V
atJ or K
1 mA Vee = MAX. Vin = 5.5 V
lin(1 ) Logical 1 level input current 50 ].lA Vee = MAX. Vin = 2.4 V
at clock
1 mA Vee = MAX. Vin = 5.5 V
lin(1) Logical 1 level input current 100 ].lA Vee = MAX. Vin = 2.4 V
at clear
1 mA Vee = MAX. Vin = 5.5 V
lOS Short-circuit output current 3 -40 -100' mA Vee = MAX. Vin = 0
Ice Supply current 32 50 mA Vee = MAX
1 All typical values are at Vee = 5 V. T A = 25°C.
2 For conditions shown as MIN'or MAX. use the appropriate value specified under recommended operating conditions
for the applicable device type. '
3 Not more than one output'should be shorted at a time. and duration of short-circuit should not exceed 1 second.
3-278