ITT - Index of

ITT9309
MSI Dual Four-Input Multiplexer
ELECTRICAL CHARACTERISTICS· [ITT9309-5Xl (TA = aOc to + 75°C, Vee = 5.0 V 5%)
LIMITS
SYMBOL CHARACTERISTICS DOC +25°C +75°C UNITS CONDITIONS
MIN. MAX. MIN. TYP. MAX. MIN. MAX.
VOH
Output High Voltage
2.4 2.4 3.0 2.4 Volts Vcc~4.75 V lo"~ -1.2 rnA (Pins 1 & 15)
Vcc~ 4.75 V lo"~ -1.08 rnA (Pins 2 & 14)
!
Inputs al threshold voltages (V" or V,")
as per truth table
Vm Output Low Voltage 0.45 0.21 0.45 0.45 Volts Vcc~ 5.25 V 1m ~ 16.0 rnA (Pins 1 & 15)
10' ~ 14.4 rnA (Pins 2 & 14)
Vcc~4.75V Im~14.1 rnA (Pins 1 & 15)
1m ~ 12.7 rnA (Pins 2 & 14)
Inputs at threshold voltages (V" or V,")
as per truth table
V," Input High Voltage 1.9 1.8 1.6 Volts Guaranteed input high threshold
for all inputs
V: l Input Low Voltage 0.85 0.85 0.85 Volts Guaranteed input low threshold
for all inputs
I. (all inputs) Input Load Current -1.6 -1.0 -1.6 -1.6 rnA Vcc~5.25 V V,~0.45V
-1.41 - .91 -1.41 -1.41 rnA Vcc~4.75V Input selected
'" (all inputs) Input Leakage CUrrent 15 60 60 pA Vcc-5.25 V V,-4.5 V
Input not selected
IPDH Vee CUrrent 43 30 43 43 rnA Vcc~5.0V All inputs high
t,o,(S,to Z.) SWitching Speed 24 36 ns
t,o (S,to Z.) Switching Speed 24 36 ns
• Pu Ise tested
Vcc~5.0 V, C,~ 15 pF, See Figure 8
A.C. CHARACTERISTICS
SWITCHING WAVEFORMS
All inputs are outputs of TTL MIC9000 series gates loaded with
15 pF. All outputs are loaded with the same capacitance
(referred to as CLl and only with capacitan'ce.
tpd; S. to Z.
CONDITIONS
Pins 3, 12 = GND.
Pin 11 = Vee
tpd; S. to Z.
CONDITIONS
Pins 3, 12 = GND.
Pin 11 = Vee
tpd; 1'0 to Z.
CONDITIONS
Pins 3, 13 = GND.
v 5 15Vr---\..15V
IIID~ ~
IPIIII)1 -.-ilpd·'---- --llpd--
VOUT·l
IPINI51
__
Figure 6
Figure 7
Figure 8
3-334