ITT - Index of

ITT5402, .ITT7402
QUADRUPLE 2-INPUT POSITIVE NOR GATES
ElECTR ICAl CHARACTERISTICS over recommended operating free-air temperature range
lunless otherwise noted)
Parameter Min Typ' Max Unit Test Conditions 2
Vinl 1 ) Logical 1 input voltage 2 V
required at either input
terminal to ensure logical
o level at output
VinlO) Logical 0 input voltage 0.8 V
required at both input
terminals to ensure logical 1
level at output
V1 Input elamp Voltage -1.5 V Vcc = Min Ii = -12 mA
Voutl 1 ) Logical 1 output voltage 2.4 3.3 V Vee = MIN. Vin = 0.8 V.
Iload = -400 uA
VoutlO) Logical 0 output voltage 0.22 0.4 V Vee = MIN. Vin = 2V.
Isink = 16 mA
linlO) Logical 0 level input current -1.6 mA Vee = MAX. Vin = 0.4 V
leach input)
linl1 ) Logical 1 level input current 40 uA Vee = MAX. Vin = 2.4 V
leach input)
1 mA Vee - MAX. Vin - 5.5 V
lOS Short-circuit output current 3 -20 -55 mA Vee = MAX I ITT5402
-18 -55 I ITT7402
leelO) Logical 0 level supply current 14 27 mA Vee = MAX. Vin = 5 V
lee(1) Logical 1 level supply current 8 16 mA Vee = MAX. Vin = 0
SWITCHING CHARACTERISTICS. Vee = 5V. TA = 25°e. N = 10
Parameter Min Typ Max Unit Test Conditions
tpdO Propagation delay time to 8 15 ns eL = 15pF.RL =4000
logical 0 level
tpd1 Propagation delay time to 12 22 ns eL = 15 pF. RL = 400n
logical 1 level
1 All typical values are at VCC = 5 V. TA = 25°C.
• For conditions shown as MIN or MAX. use the appropriate value specified under recommended operating conditions
for the applicable device type.
3 Not more than one output should be shorted at a time.
3-20