ITT - Index of

ITT7524, ITT7525
DUAL SENSE AMPLIFIERS
SWITCHING CHARACTERISTICS, Vcc+ = 5 V, Vcc - = -5 V, Coxt ;?! 100 pF, TA = 25°C
Propagation Delay Times
Test
Symbol From Input To Output Fig.
tl'LH(n) A1-A2 W
hHL(n)
tpLH(S) Strobe W
tpHL(s)
37
37
Min Typ Max Unit Test Conditons
25 40 ns CL = 15 pF, RL - 288 n
20 ns
15 30 ns CL - 15 pF, RL- 288 n
20 ns
TYPICAL RECOVERY AND CYCLE TIMES, Vcc+
5 V, Vcc - = -5V, Cext ;?! 100 pF, TA = 25°C
Parameter
Min
Typ
Max Unit Test Conditions
tOI'D
Differential-input overload
recovery time
(see Note 5)
20 ns Differential Input Pulse:
VII) = 2 V, te = tf = 20 ns
torc
Common-mode-input
overload recovery time
(see Note 6)
20 ns Common-Mode Input Pulse:
VIC = ±2V, te = tf = 20 ns
tcyc(min)
Minimum cycle time
200 ns
NOTES:
5. Differential-input overload recovery time
is the time necessary for the device to recover
from the specified common-mode-input overload
signal prior to the strobe-enable signal.
6. Common-mode-input overload recovery time
is the time necessary for the device to recover
from the specified common-mode-input overload
signal prior to the strobe-enable signal.
6-14