ITT - Index of

ITT5408,ITT5409, ITT7408, ITT7409
QUADRU PLE 2-IN PUT POSITIVE AND GATES
ElECTRICAL CHARACTERISTICS over recommended operating free-air temperature range
(unless otherwise noted)
ITT5409, ITT7409
Parameter Min Typ' Max Unit Test Conditions 2
VIH High-level input voltage 2 V
Vil low-level input voltage 0.8 V
V1 Input clamp voltage -1.5 V Vee =MIN,li = -12 mA
IOH High-level output current 250 uA Vee = MIN. VIH = 2V.
VOH = 5.5V
VOL low-level output voltage 0.4 V Vee = MIN, Vil = 0.8V.
IOL = 16mA
IIH High-level input current (each 40 uA Vee = MAX, VI = 2.4V
input)
1 mA Vee = MAX. VI = 5.5V
III low-level input current (each -1.6 mA Vee = MAX, VI = 0.4V
input)
ICCH Supply current. high-level output 11 21 mA Vee = MAX, VI = 5V
ICCl Supply current. low-level output 20 33 mA Vee = MAX, VI = OV
SWITCH!NG CHARACTERISTICS, Vee = 5V, TA = 25°e, N = 10
ITT5409, ITT7409
Parameter Min Typ Max Unit Test Conditions
tplH Propagation delay time, 21 32 ns eL = 15 pF, RL = 400n
low-to-high-Ieveloutput
tpHl Propagation delay time. 16 24 ns el = 15 pF, RL = 400n
high-to-Iow-Ieveloutput
, All typical values at V CC = 5V, T A = 25°e.
2 For conditions shown as MIN or MAX. use the appropriate value specified under recommended operating conditions
for the applicable device type.
, Not more than one output should be shorted at a time.
3- 34