SIMPLORER User Manual V6.0 - FER-a

4
5
166 Modeling with Circuit Components
Converting Uniform RC Components to LTRA
The LTRA parameters should be:
• LEN = LEN from the URC instance
• R = RPERL from the URC model
• C = CPERL from the URC model
• L = G = 0
Other parameters of the URC model should be ignored. The diode mode of URC, which employs
ISPERL and RSPERL parameters, is not supported for SIMPLORER.
Current and Voltage Reference Arrow System
P1POS
+
V1
−
P1NEG
I1 I2 P2POS
+
V2
−
P2NEG
Dialog Settings
� «Value»
Click the «Value» field of the corresponding parameter to define a value. Common parameter
types. Enter a numerical value, a variable, or an expression. The parameters can be set only
at the beginning of a simulation.
Look the parameter meaning up in the info lines of the parameter table (online help).
«Name»«Default»«Unit»«Description»
Displays the parameter names and their corresponding unit, default value, and description.
You cannot make changes in these fields. If you want to add user-specific information to a
parameter, use the «Info» field in the component output dialog.