SIMPLORER User Manual V6.0 - FER-a

15
482 Model Libraries
Command Description
COMPACT AND RE-
PAIR LIBRARY
CONVERT 4.X LI-
BRARY
Compacts and repairs a SIMPLORER model library. Enter the name
of the library, and start the process.
Before you can start the repair process, you have to unistall the corresponding
model library. The model library must not be installed.
Converts an existing SIMPLORER 4.x library into a SIMPLORER library
6.0. See also “Converting 4.x Libraries” on page 485.
EDIT STRINGS Displays all text strings used from the selected library, and allows you
to modify entries. The order of the strings is irrelevant to the models.
EXPORT LIBRARY Creates a separate .sml or .vhd file from the selected model library
with all model descriptions, either in SML text (choose SML20) or
VHDL-AMS (choose VHDL-AMS).
PROPERTIES Displays all existing language tables from the selected library (text
and modeling language). You can add a new resource with .
See also “SIMPLORER Language Concept” on page 483.
EXIT Closes the Model Agent.
You can create content folders to structure the content within a
libary. These content folders make it easier to search for large libraries.
Use the ELEMENTS>NEW> FOLDER menu command to install a
new folder. You can change the name immediately or later by clicking
twice in the name field and entering a new name.Creating
Libraries
Library
Folder
Component (Model)
To create a new library do the following:
1 Choose FILE>NEW LIBRARY in the Model Agent or choose «New Library» on the shortcut
menu of a tab in the Model Agent, Schematic, or Symbol Editor.
2 Define library name and location. Click .
3 Click in the «Resource Tables» area, and select a language for model text
strings. Parameter names are identical for all language resources.
4 Click . A new set of entries appears in the list.
5 Repeat steps 3 and 4 if you need more than one language.
6 Click in the «Simulation Tables» area, and select SML20 for the simulation description
used in the version 6.0.
7 Click . A new set of entries appears in the list.
8 Repeat steps 6 and 7 if you need also VHDL-AMS as modeling language.
9 Click to create the new model library.
The model library is inserted into the model tree without a model. You can insert models via
ELEMENT>NEW or by dragging and dropping from other libraries. The name for the model library
and language resources can be modified later.