SIMPLORER User Manual V6.0 - FER-a

10
314 Physical Domains
Dialog Settings
� «Value»
Click the «Value» field of the corresponding parameter to define a value. Common parameter
types. Enter a numerical value, a variable, or an expression. Look the parameter meaning up
in the parameter table below.
«Name»«Default»«Unit»«Description»
Displays the parameter names and their corresponding unit, default value, and description.
You cannot make changes in these fields. If you want to add user-specific information to a
parameter, use the «Info» field in the component output dialog.
Component Parameters
Description [Unit] Parameter Name Data Type
Fluid Density [kg/m³] RHO real
Diameter [m] DIA real
Length [m] LEN real
Initial Flow Rate [m³/s] Q0 real
Component Outputs
Description [Unit] Parameter Name Data Type
Differential Pressure [Pa] P real
Flow Rate [m³/s] Q real
Component Nodes
Description Node Name Nature
Pin 1 (with red point) H1 fluidic
Pin 2 H2 fluidic
10.2 Magnetic Components
• Magneto-Motive Force Source (MMF)
• Flux Source (FLUX)
• Magneto-Resistor (RMAG)
• Winding (ELTOMAG)
Across and Through Quantity of the Magnetic Domain
Across Through Equation
Magneto-Motive Force
[A]
Magnetic Flux [Vs] MV() t =
K⋅FLUX() t
The magnetic domain components appear in the Magnetic folder of Physical Domains in the
«Basics» tab. The folder provides magnetic basic components to model simple magnetic
equivalent circuits. The magnetic domain uses the magneto-motive force as across and the
magnetic flux as through quantity.