SIMPLORER User Manual V6.0 - FER-a

6
246 Modeling with State Graphs
State Markers During a Simulation
During a simulation, the state markers are shown “running” through the state graph, depending
on the active states in the simulation process.
Moving a State Marker
Set the state active Negate the active state
The SIMULATION>RESTORE ANIMATED SYMBOLS function initializes the state components if the
simulation was interrupted.
Displaying the State of State Components
Set or negate
the active state
If you want to see the state markers changing, select the option «Use Animated Symbols»
in SHEET>PROPERTIES «System» and update the state graph elements from SIMPLORER version
4.2 with SHEET>SYNCHRONIZE.
� � �
To display a state select either the output for Current value of State in the «Output/Display»
tab or the parameter ST of a state component in a Display Element. The parameter ST has the
direction attribute INOUT.