SIMPLORER User Manual V6.0 - FER-a

9
296 Modeling Tools
Components Using Characteristics
The mapping of the X and Y values to physical quantities (voltage, current, and so on) depends
on the used characteristics within the simulation model. The table below shows how SIM-
PLORER interprets the data to calculate the present value of a component.
Component Name x y
RNL Nonlinear resistor v i
GVNL Nonlinear voltage-controlled conductor v G
CNL Nonlinear capacitor q v
CVNL Nonlinear dual capacitor v C
LNL Nonlinear inductor Ψ i
LINL Nonlinear dual inductor i L
D Diode v i
BJT Transistor v i
TH Thyristor v i
GTO GTO-Thyristor v i
TRIAC TRIAC v i
IGBT IGBT v i
MOS MOS v i
EVNL, IVNL Nonlinear voltage-controlled sources vc E/I
EINL, IINL Nonlinear current-controlled sources ic E/I
NL Nonlinear transfer block input val
DCMENL DC Machine Nonlinear electrical excitation i Ψ/L
Symbol Description [Unit]
v Component voltage [V]
i Component current [A]
Ψ Flux linkages of the inductor [Vs]
q Charge of the capacitor [As]
L Inductance [H]
C Capacitance [F]
vc Control voltage [V]
ic Control current [A]
input Block input (without dimension)
val Block output (without dimension)
E/I Source voltage/Source current