SIMPLORER User Manual V6.0 - FER-a

9
278 Modeling Tools
Pulse
Component Parameters
Description [Unit] Parameter Name Data Type
Frequency [Hz] FREQ real
Period [s] TPERIO real
Amplitude AMPL real
Phase [deg] PHASE real
Periodical PERIO real
Offset OFF real
Initial Delay [s] TDELAY real
Component Outputs
Description [Unit] Parameter Name Data Type
Sine Wave VAL real
Derivative of Value dVAL real
>>Basics>Tools>Time Functions
yt () = AMPL ⋅ pulse ( 360° ⋅ FREQ ⋅ t + PHASE)
+ OFF
AMPL
OFF
PHASE=90°
TDELAY 1/FREQ
TPERIO
t
Dialog Settings
«Amplitude»
Defines the amplitude value. Common parameter type. Enter a numerical value, a variable,
or an expression in the text box.
«Frequency [Hz]»
Defines the frequency of the pulse function. Common parameter type. Enter a numerical value,
a variable, or an expression in the text box.
� � «Period [s]»
If the box is checked, the period is defined by the value entered in the input filed, otherwise
the period is 1/frequency.
«Delay [s]»
Defines the initial delay of the pulse function. Common parameter type. Enter a numerical
value, a variable, or an expression in the text box.