SIMPLORER User Manual V6.0 - FER-a

4
5
190 Modeling with Circuit Components
Dialog Settings
� «Value»
Click the «Value» field of the corresponding parameter to define a value. Common parameter
types. Enter a numerical value, a variable, or an expression. Look the meaning up in the parameter
table below.
«Name»«Unit»«Description»
Displays the parameter names and their corresponding unit and description. You cannot
make changes in these fields. If you want to add user-specific information to a parameter use
the «Info» field in the component output dialog.
Component Parameters
Description [Unit] Parameter Name Data Type
Main Inductance [H] LM real
Leakage Inductance Primary Side [H] LS1 real
Leakage Inductance Secondary Side [H] LS2 real
Equivalent Resistance for Iron Losses [Ω] RFE real
Winding Resistance Primary Side [Ω] RCU1 real
Winding Resistance Secondary Side [Ω] RCU2 real
Coupling Factor [/] KTR real
Component Outputs
Description [Unit] Parameter Name Data Type
Voltage Primary Side [V] V1 real
Voltage Secondary Side [V] V2 real
Current Primary Side [A] I1 real
Current Secondary Side [A] I2 real
Component Nodes
Description Node Name Nature
Primary Side Node A and B N1_A, N1_B electrical
Secondary Side Node A and B N2_A, N2_B electrical