SIMPLORER User Manual V6.0 - FER-a

12
370 Simulation Results
Outputs in Quick View Elements
Display Elements provide all simulation quantities of a sheet for online output, including simulation
time “t” and frequency “f”.
To assign a simulation quantity for the Y axis do the following:
1 Place a display element on the sheet.
2 Double-click the symbol to open the property dialog.
3 Select either «Time Channel» or «Frequency Channel» as X axis value.
a. To assign another quantity as X axis value, select «Others» and click the symbol.
b. Select one of the parameter in the simulation quantity tree and click .
4 Click the symbol in the Y axis area.
5 Select all parameters you want in the simulation quantity tree and click .
a. To add real, imaginary part, magnitude, and/or phase for output, select the quantity in the
output tree, click the C symbol and select one of the entries. If you want to change the current
number component, select an entry in the «Number Component» list.
Number components are only available with an AC simulation. For transient and DC simulations
only real components provides values.
b. To define color, Y axis, scale, and offset, select the quantity in the output tree and define
the settings in the dialog.
�
�
�
�
�
�
�
�
�
Select the simulation quantity of the X axis
Click the “New entry” symbol to open the simulation quantity tree
Select the simulation quantities for output and click
Select the entry in the tree of output quantities
Make the settings you want in the dialog
�