SIMPLORER User Manual V6.0 - FER-a

W 2
KTR = ------- with W1 = Windings Primary Side and
W1 =
Windings Secondary Side
SIMPLORER 6.0 — Manual 197
Dialog Settings
� «Value»
Click the «Value» field of the corresponding parameter to define a value. Common parameter
types. Enter a numerical value, a variable, or an expression. Look the meaning up in the parameter
table below.
«Name»«Unit»«Description»
Displays the parameter names and their corresponding unit and description. You cannot
make changes in these fields. If you want to add user-specific information to a parameter use
the «Info» field in the component output dialog.
Component Parameters
Description [Unit] Parameter Name Data Type
Main Inductance [H] LM real
Leakage Inductance Primary Side Phase 1 [H] LS1_P1 real
Leakage Inductance Primary Side Phase 2 [H] LS1_P2 real
Leakage Inductance Primary Side Phase 3 [H] LS1_P3 real
Equivalent Resistance for Iron Losses [Ω] RFE real
Winding Resistance Primary Side Phase 1 [Ω] RCU1_P1 real
Winding Resistance Primary Side Phase 2 [Ω] RCU1_P2 real
Winding Resistance Primary Side Phase 3 [Ω] RCU1_P3 real
Coupling Factor 1/Coupling Factor 2/Coupling Factor 3 [/] KTR1/KTR2/KTR3 real
Component Outputs
W 2
Description [Unit] Parameter Name Data Type
Voltage Primary Side Phase 1 [V] V1_P1 real
Voltage Primary Side Phase 2 [V] V1_P2 real
Voltage Primary Side Phase 3 [V] V1_P3 real
Current Primary Side Phase 1 [A] I1_P1 real