SIMPLORER User Manual V6.0 - FER-a

9
280 Modeling Tools
Dialog Settings
«Amplitude»
Defines the amplitude value. Common parameter type. Enter a numerical value, a variable,
or an expression in the text box.
«Frequency [Hz]»
Defines the frequency of the triangular function. Common parameter type. Enter a numerical
value, a variable, or an expression in the text box.
� � «Period [s]»
If the box is checked, the period is defined by the value entered in the input filed, otherwise
the period is 1/frequency.
«Delay [s]»
Defines the initial delay of the triangular function. Common parameter type. Enter a numerical
value, a variable, or an expression in the text box.
«Phase [deg/rad]»
Defines the phase shift of the triangular function. Common parameter type. Enter a numerical
value, a variable, or an expression in the text box.
� «Angular Dimension»
In the list, select radians or degrees. The dimension is applied to the phase.
«Offset»
Defines the phase offset of the triangular function. Common parameter type. Enter a numerical
value, a variable, or an expression in the text box.
� «Periodical»
In the list, select «Yes» for a periodical triangular function; select «No» for carrying out only
one period corresponding to the defined frequency. After them the triangular function is '0'.
Click the button to display the triangular function with the defined values. Please note: If you
use variables for the definition, the preview is empty.
Component Parameters
Description [Unit] Parameter Name Data Type
Frequency [Hz] FREQ real
Period [s] TPERIO real
Amplitude AMPL real
Phase [deg] PHASE real
Periodical PERIO real
Offset OFF real
Initial Delay [s] TDELAY real
Component Outputs
Description [Unit] Parameter Name Data Type
Triangular Wave VAL real
Derivative of Value dVAL real