SIMPLORER User Manual V6.0 - FER-a

3
5
48 General Modeling Functions
Connect Toolbar and Menu
The Connect toolbar and CONNECT menu offer further functions for connections.
Connect Menu �
Command Toolbar
Symbol
3.3.4 Defining Component Properties
Cursor Symbol Description
WIRE Starts the wire mode to connect components.
GROUND Places a ground node on the sheet. Depending
on the domain of the connected component
the symbol changes shape and color.
PORT Places a new port for external connections.
Enter the port name in the input field and click
.
MOVE PIN Starts the moving pin mode.
PROBE Places a probe at the selected wire on the
sheet. See also “Probe Elements” on page 380.
SHOW DC
RESULTS
HIDE DC
RESULTS
Displays results of an DC simulation at all corresponding
components on the sheet.
Hides results of an DC simulation at all corresponding
components on the sheet.
Every component placed on the sheet has a property dialog to modify the component parameters.
The form varies depending on the corresponding component.
Do one of the following to open the property dialog:
• Double-click the component.
• Click with right mouse button the component, and choose «Properties».
• Choose the EDIT>PROPERTIES command for the selected component.